P0246Powertrain
Turbocharger wastegate solenoid — high signal
Where to start
The turbo wastegate control circuit: the signal is too high. Check the connector and the actuator's vacuum lines — a cracked line produces this code with nothing wrong in the turbo itself.
A code is not a diagnosis. It says which check failed, not which part to replace. Clearing it without repair only means the car will report it again in a few trips.
How to put together a report a mechanic will actually read
We have a detailed piece on thisTurbo and boost: P0234, P0299 and the control valve
How the code is built
Letter — the systemPowertrain: engine and transmission
Common or the maker's ownGeneric code: the same on every car
Which part of the engineFuel and air metering: injectors
Number of the faultThe serial number inside that group — it does not say how serious the fault is
All codes in «Fuel and air metering: injectors»
How the app helps
CarScan reads this code from your car through an OBD-II adapter, shows whether it is active now or only stored, names the module that reported it, and puts it into a plain-text report for your mechanic.